Factory reset your Wifi device

1. Press and hold the reset button for 12 seconds. The light will flash yellow, then turn solid yellow. When the light is solid yellow, release the button.
2. The reset button will start, which can take up to 5 minutes. Don't unplug the power cord during this process.
3. When the factory reset is complete, the light on your router will flash white, then blue to indicate that the device is ready for setup.
4. After the device has been reset, the device will still appear in the Google Home app. To remove the device, follow the instructions for app factory reset. To set up again, add back your device to your existing network or create a new network.

The factory reset button is located on the bottom of the router. Check for a circle etched into the bottom, then:

1. Press and hold the factory reset button for 10 seconds. The light will flash yellow, then turn solid yellow. When the light is solid yellow, release the button.
2. The reset process will start, which can take up to 10 minutes. Don't unplug the power cord during this process.
3. When factory reset is complete, the light on your router will pulse white.
4. After the device has been reset, the device will still appear in the Google Home app. To remove the device, follow the instructions for app factory reset. To set up again, add your device back to your existing network or  create a new network.

The hardware button factory reset will delete all current settings and data from your device. However, all data Google has collected and analyzed for Cloud services will remain. After 6 months, Google will automatically delete this Cloud data. You can always remove this data by performing a factory reset from the Google Home app, even on the offline network.

The factory reset button is located on the bottom of the point. Check for a circle etched into the bottom, then:

1. Press and hold the factory reset button on your point.
2. After about 5 seconds, your device will begin the factory reset process. Continue to hold the button for about 10 seconds, until there's a sound confirming the device is resetting.
3. After the device has been reset, the device will still appear in the Google Home app. To remove the device and your previous network, follow the instructions for app factory reset.

The hardware button factory reset will delete all current settings and data from your device. However, all data Google has collected and analyzed for Cloud services will remain. After 6 months, Google will automatically delete this Cloud data. You can always remove this data by performing a factory reset from the Google Home app.

1. Unplug your OnHub from the power source.
2. Find the factory reset button.
   • OnHub from TP-Link: Twist the outer shell counterclockwise, then lift. The factory reset button is located above the power port.
   • OnHub from ASUS: The factory reset button is located above the USB port on the back of the device.
3. Use the end of a paper clip to press, then hold the factory reset button. While holding down the button, plug the power cable back in. Continue to press the factory reset button for about 10 seconds.
   • Note: If you hold the button for too long more than 15 seconds, the device will start flashing red and won't factory reset. In this case, unplug and try again.
4. The reset process will start, which can take up to 10 minutes. During this process, don't remove the OnHub from the power source.
5. When complete, your OnHub will pulse blue.
6. After the device has been reset, the device will still appear in the Google Home app or Google Wifi app. To remove the device and your previous network, follow the instructions for app factory reset. 

Note: As of Jan 11, 2023, OnHub is no longer supported.